NABL Test Report for 1% Hyaluronic Acid Long Lasting Foundation, Cinnamon
1% Hyaluronic Acid Long Lasting Foundation, Cinnamon: NABL Lab Test Report
NABL lab test report for 1% Hyaluronic Acid Long Lasting Foundation, Cinnamon: heavy metals not detected. Batch B002.
Safety Summary: 1% Hyaluronic Acid Long Lasting Foundation, Cinnamon
Is 1% Hyaluronic Acid Long Lasting Foundation, Cinnamon safe? Yes. It was independently tested at Sigma Test & Research Centre, a laboratory accredited by NABL (Accreditation No. TC-5369). The tested sample, from batch B002, was analysed against the limits in the referenced standards.
Free from lead, arsenic and mercury. The report found no detectable lead, arsenic or mercury - each was below the laboratory's detection limit of 0.25 mg/kg.
Sulphate-free and paraben-free. The published ingredient list contains no sulphates, parabens or mineral oil. Preservation uses phenoxyethanol (and) tropolone.
Is it chemical free? No cosmetic is chemical-free - water itself is a chemical. This one is free from sulphates, parabens, mineral oil and any detectable lead, arsenic or mercury.
What these results cover. The laboratory findings apply to the tested sample from batch B002 and the parameters listed on this page. Skin tolerance is assessed separately, in the dermatological patch test certificate. NABL accredits laboratories, not products.
Key Findings at a Glance
Results of Analysis
Result is the measured outcome for this batch. Requirement / Limit is the specification where the standard defines one; a dash means it defines none. Test Method is the standard the laboratory followed.
| Parameter | Result | Requirement / Limit | Test Method |
|---|---|---|---|
| Physical & Organoleptic | |||
| Appearance | Brown coloured viscous liquid | - | STRC/STP/F256 |
| Colour | Brown | - | STRC/STP/F256 |
| Odour | Characteristic | - | STRC/STP/P044 |
| Chemical Parameters | |||
| Thermal Stability at 45C for 48 hr | Passes the test | Shall pass the test | IS 14318:1996 |
| Suspended Solids, % by mass | 13.08 | Min- 5 | IS 14318:1996 |
| Heavy Metals | |||
| Lead (as Pb), ppm | Not Detected (DL 0.25) | - | STRC/STP/P018 |
| Arsenic (as As), ppm | Not Detected (DL 0.25) | - | STRC/STP/P018 |
| Mercury (as Hg), ppm | Not Detected (DL 0.1) | - | STRC/STP/P018 |
Understanding These Tests for 1% Hyaluronic Acid Long Lasting Foundation, Cinnamon
Physical & Organoleptic
On the tested sample, 1% Hyaluronic Acid Long Lasting Foundation, Cinnamon was recorded as a brown coloured viscous liquid, brown in colour and with a characteristic odour.
These checks record what the laboratory observed in the sample as received.
Chemical Parameters
1% Hyaluronic Acid Long Lasting Foundation, Cinnamon recorded thermal Stability at 45C for 48 hr Passes the test against a requirement of Shall pass the test and suspended Solids, % by mass 13.08 against a minimum of - 5.
Chemical parameters are measured against the standard's specification where one exists.
Heavy Metals
In this report, 1% Hyaluronic Acid Long Lasting Foundation, Cinnamon showed no detectable lead, arsenic or mercury - each below the laboratory's detection limit of 0.1 mg/kg.
Heavy metals can enter a product through raw materials or manufacturing.
Test Overview
| Report Title | Chemical and Microbiological Analysis - 1% Hyaluronic Acid Long Lasting Foundation, Cinnamon |
| Parameters Measured | physical and organoleptic properties, chemical parameters and heavy metals |
| Test Type | Laboratory chemical and microbiological analysis of a product sample |
| Test Methods | IS:14318:1996 |
| Sample Tested | B002 (30 ml x 15) |
About 1% Hyaluronic Acid Long Lasting Foundation, Cinnamon
The Derma Co long lasting matte foundation of cinnamon shade. Perfect for dark skin tones, gives dewy finish & covers dark spots. Designed by dermatologists.
Claims and Their Evidence
Lab-sourced rows are measured results. Product-page rows are the brand's own claims, shown with the brand's qualifier. The laboratory report is not evidence for cosmetic-benefit claims.
| Statement | Evidence / basis | Source |
|---|---|---|
| No detectable heavy metals | Lead, Arsenic and Mercury reported Not Detected at a detection limit of 0.25 mg/kg. | Lab report 13021024/A |
| Sulphate-free cleansing base | No SLS or SLES in the published ingredient list. | Product ingredient list |
| Paraben-free | No parabens in the published ingredient list. | Product ingredient list |
Report Details
| Testing Laboratory | Sigma Test & Research Centre (NABL-accredited, Accreditation No. TC-5369) |
| ULR Number | TC536924000000844F |
| Report No. | 13021024/A, 13021024/B |
| Report Issue Date | 23/01/2024 |
| Testing Period | 13/01/2024 to 18/01/2024 |
| Batch Tested | B002 (Mfg. 12/2023; 11/2026) |
| Standards Referenced | IS:14318:1996 |
| Authorised Signatory | Vinit Sharma, Person Incharge, Sigma Test & Research Centre |
What This Report Shows
What the results demonstrate
- Physical characteristics of the tested sample were recorded as observed by the laboratory.
- The listed heavy metals were below the laboratory's detection limit in the tested sample.
- Testing was performed by an NABL-accredited laboratory.
What the results do not demonstrate
- They do not certify the product; NABL accredits laboratories, not products.
- They do not establish overall safety or suitability for every individual.
- They do not prove any cosmetic-benefit or performance claim; those are addressed separately and on the product page.
- They do not cover parameters or organisms outside those listed.
- They apply to the tested sample from the stated batch, not necessarily to other batches.
Formulation at a Glance
From the ingredient list published on the product page. Not part of the laboratory report.
Active Ingredients
| Component | Role in the formulation |
|---|---|
| Niacinamide | Vitamin B3 derivative used for tone and barrier support. |
| Sodium Hyaluronate | Salt of hyaluronic acid; binds water for hydration. |
Moisturising and Emollient
| Component | Role in the formulation |
|---|---|
| Squalane | Skin-compatible lightweight emollient. |
| Butylene Glycol | Humectant and solvent. |
Conditioning Agents
| Component | Role in the formulation |
|---|---|
| Cyclopentasiloxane | Volatile silicone giving a light, smooth application. |
| Cetyl PEG/PPG-10/1 Dimethicone | Silicone that smooths the surface and adds slip. |
UV Filters
| Component | Role in the formulation |
|---|---|
| Octocrylene | UV filter that also stabilises other filters. |
| Ethylhexyl Methoxycinnamate | UVB filter. |
Texture and Stability
| Component | Role in the formulation |
|---|---|
| Aqua | Solvent base of the formulation. |
| Isododecane | Volatile solvent for long-wear formulas. |
| Silica Dimethyl Silylate | Mineral powder that absorbs oil and adds a soft-focus finish. |
| Sodium Gluconate | Plant-derived chelating agent that improves stability. |
Preservative System
| Component | Role in the formulation |
|---|---|
| Phenoxyethanol (and) Tropolone | Broad-spectrum preservative used at low levels. |
Colourants
| Component | Role in the formulation |
|---|---|
| CI 77891 (and) Aluminum Hydroxide (and) Triethoxycaprylylsilane | Approved cosmetic colourant. |
What the Formulation Leaves Out
| Excluded | Basis |
|---|---|
| No sulphates | Not present in the published ingredient list. |
| No parabens | Not present in the published ingredient list. |
| No mineral oil | Not present in the published ingredient list. |
Published Research on Key Actives
Published literature on each ingredient, not studies on this product.
| Ingredient | Published finding | Relevance to the formulation |
|---|---|---|
| Niacinamide | Topical niacinamide has been reported to improve the appearance of ageing facial skin, including tone and texture (Bissett DL, et al. Dermatol Surg. 2005;31(7 Pt 2):860-865). | Supports the inclusion of niacinamide in tone and barrier formulas. |
| Hyaluronic Acid | Hyaluronic acid is documented as a key water-binding molecule in skin hydration (Papakonstantinou E, et al. Dermatoendocrinol. 2012;4(3):253-258). | Supports hyaluronic acid or sodium hyaluronate as a hydrating agent. |
Dermatological Patch Test Certificate
This NABL lab test report covers the chemical and microbiological analysis of 1% Hyaluronic Acid Long Lasting Foundation, Cinnamon. Skin tolerance is a separate question, assessed through dermatological patch testing. The dermatological patch test certificate for this product is published on its own page, so you can review the laboratory analysis here and the patch-test findings there as one trust cluster.
View the Original Lab Report
The complete original report for 1% Hyaluronic Acid Long Lasting Foundation, Cinnamon is available as issued by the laboratory. It carries the laboratory letterhead, the ULR number, and the authorised signatory's details.
The Tested Product
1% Hyaluronic Acid Long Lasting Foundation, Cinnamon
The results on this page come from laboratory testing of a sample from batch B002. See the complete ingredient list, current offers and reviews on the product page. Learn more about Hyaluronic Acid. You can also explore the full product range.
View ProductFrequently Asked Questions
A: Yes. In this report, Lead, Arsenic and Mercury were reported below the laboratory's stated detection limit of 0.25 mg/kg at Sigma Test & Research Centre, an NABL-accredited laboratory (Accreditation No. TC-5369).
A: The published ingredient list for this product contains no sulphates, parabens or mineral oil. This is based on the ingredient list, not on the laboratory report, which covers contaminants and microbiological quality.
A: No. The report covers chemical and microbiological parameters on a sample from the stated batch. Performance and cosmetic-benefit claims are made by the brand on the product page and are not part of this laboratory report.
A: It means the substance was below the laboratory's stated detection limit using the specified method, so it was not found at or above that limit in the tested sample.
A: A ULR (Unique Lab Report) number is a one-of-a-kind identifier that NABL-accredited laboratories print on every test report, making it traceable. The ULR for this report is TC536924000000844F. The original report PDF linked on this page carries the laboratory letterhead and authorised signatory details.
A: No. NABL accredits laboratories, not products. This page reports the results of testing performed at Sigma Test & Research Centre, an NABL-accredited laboratory (Accreditation No. TC-5369) on a sample of this product. It does not represent a product certification by NABL.
A: The report covers batch B002 (manufactured 12/2023). The laboratory report states the tested sample as 30 ml x 15. Results refer only to the tested sample and the parameters listed.
References
- IS:14318:1996. Bureau of Indian Standards.
- Sigma Test & Research Centre. Test reports 13021024/A, 13021024/B.
Available offers for you (4)