NABL Test Report for 1% Hyaluronic Tinted Sunscreen Gel SPF 60
1% Hyaluronic Tinted Sunscreen Gel SPF 60: NABL Lab Test Report
NABL lab test report for 1% Hyaluronic Tinted Sunscreen Gel SPF 60: heavy metals not detected, pathogens absent and pH 6.30. Batch BHTS-01.
Safety Summary: 1% Hyaluronic Tinted Sunscreen Gel SPF 60
Is 1% Hyaluronic Tinted Sunscreen Gel SPF 60 safe? Yes. It was independently tested at Sigma Test & Research Centre, a laboratory accredited by NABL (Accreditation No. TC-5369). The tested sample, from batch BHTS-01, was analysed against the limits in the referenced standards.
Free from lead, cadmium, arsenic, mercury and antimony. The report found no detectable lead, cadmium, arsenic, mercury or antimony - each was below the laboratory's detection limit of 0.25 mg/kg.
Free from harmful bacteria and fungi. Four organisms were tested: Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Candida albicans. All were reported Absent. Total microbial count was Less than 10 cfu/gm (limit 1000 cfu/gm); Total yeast & mould count was Less than 10 cfu/gm (limit 100 cfu/gm).
Gentle, skin-friendly pH. The measured pH is 6.30, which is mildly acidic.
Sulphate-free and paraben-free. The published ingredient list contains no sulphates, parabens or mineral oil.
Is it chemical free? No cosmetic is chemical-free - water itself is a chemical. This one is free from sulphates, parabens, mineral oil and any detectable lead, cadmium, arsenic, mercury or antimony.
What these results cover. The laboratory findings apply to the tested sample from batch BHTS-01 and the parameters listed on this page. Skin tolerance is assessed separately, in the dermatological patch test certificate. NABL accredits laboratories, not products.
Key Findings at a Glance
Results of Analysis
Result is the measured outcome for this batch. Requirement / Limit is the specification where the standard defines one; a dash means it defines none. Test Method is the standard the laboratory followed.
| Parameter | Result | Requirement / Limit | Test Method |
|---|---|---|---|
| Physical & Organoleptic | |||
| Description | Brown coloured soft mass | - | By visual |
| Colour | Brown | - | By visual |
| Odour | Characteristic | - | By Organoleptically |
| Chemical Parameters | |||
| pH | 6.30 | - | IS:2711:1979 |
| Total residue, % w/w | 43.93 | - | IS:6608:2004 |
| Density, g/ml | 1.056 | - | IP 2018 |
| Viscosity (Temp. 27.2C, RPM 30, SPL No. 64), cps | 4038 | - | IP 2018 |
| Specific gravity | 1.059 | - | IP 2018 |
| Heavy Metals | |||
| Lead (as Pb), ppm | Not Detected (DL 0.25) | - | STRC/STP/P018 |
| Cadmium (as Cd), ppm | Not Detected (DL 0.25) | - | STRC/STP/P018 |
| Arsenic (as As), ppm | Not Detected (DL 0.25) | - | STRC/STP/P018 |
| Mercury (as Hg), ppm | Not Detected (DL 0.1) | - | STRC/STP/P018 |
| Antimony (as Sb), ppm | Not Detected (DL 0.25) | - | STRC/STP/P018 |
| Microbial Counts | |||
| Total microbial count, cfu/gm | Less than 10 | NMT 1000 | IS:14648:2011 |
| Total yeast & mould count, cfu/gm | Less than 10 | NMT 100 | IS:14648:2011 |
| Pathogens | |||
| Escherichia coli, per gm | Absent | - | IS:14648:2011 |
| Pseudomonas aeruginosa, per gm | Absent | - | IS:14648:2011 |
| Staphylococcus aureus, per gm | Absent | - | IS:14648:2011 |
| Candida albicans, per gm | Absent | - | IS:14648:2011 |
Understanding These Tests for 1% Hyaluronic Tinted Sunscreen Gel SPF 60
Physical & Organoleptic
On the tested sample, 1% Hyaluronic Tinted Sunscreen Gel SPF 60 was recorded as description Brown coloured soft mass, brown in colour and with a characteristic odour.
These checks record what the laboratory observed in the sample as received.
Chemical Parameters
It also lists pH 6.30, total residue 43.93 % w/w, density, g/ml 1.056, viscosity 4038 cps and specific gravity 1.059, for which the standard sets no specification.
Chemical parameters are measured against the standard's specification where one exists.
Heavy Metals
In this report, 1% Hyaluronic Tinted Sunscreen Gel SPF 60 showed no detectable lead, cadmium, arsenic, mercury or antimony - each below the laboratory's detection limit of 0.25 mg/kg.
Heavy metals can enter a product through raw materials or manufacturing.
Microbial Counts
1% Hyaluronic Tinted Sunscreen Gel SPF 60 recorded total microbial count Less than 10 cfu/gm against a limit of NMT 1000 cfu/gm and total yeast & mould count Less than 10 cfu/gm against a limit of NMT 100 cfu/gm.
These tests count viable microorganisms against the limits set by the standard.
Pathogens
In the tested sample of 1% Hyaluronic Tinted Sunscreen Gel SPF 60, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Candida albicans were reported Absent - not detected in the tested quantity.
Pathogen tests cover only the organisms listed, not all microorganisms.
Test Overview
| Report Title | Chemical and Microbiological Analysis - 1% Hyaluronic Tinted Sunscreen Gel SPF 60 |
| Parameters Measured | physical and organoleptic properties, chemical parameters, heavy metals, microbial counts and pathogens |
| Test Type | Laboratory chemical and microbiological analysis of a product sample |
| Test Methods | IS:2711:1979; IS:6608:2004; IS:14648:2011 |
| Sample Tested | BHTS-01 (50g X 6) |
About 1% Hyaluronic Tinted Sunscreen Gel SPF 60
The Derma Co 1% hyaluronic tinted sunscreen gel for maximum protection. It is dermatologically designed to be effective in protecting against harmful uv rays.
Claims and Their Evidence
Lab-sourced rows are measured results. Product-page rows are the brand's own claims, shown with the brand's qualifier. The laboratory report is not evidence for cosmetic-benefit claims.
| Statement | Evidence / basis | Source |
|---|---|---|
| No detectable heavy metals | Lead, Cadmium, Arsenic, Mercury and Antimony reported Not Detected at a detection limit of 0.25 mg/kg. | Lab report 13002499/A |
| Within microbiological limits | Counts within the standard limits; specified pathogens reported Absent. | Lab report 13002499/B |
| 1% hyaluronic tinted sunscreen gel for maximum protection | Brand claim published on the product page. | Product page (brand claim) |
| Sulphate-free cleansing base | No SLS or SLES in the published ingredient list. | Product ingredient list |
| Paraben-free | No parabens in the published ingredient list. | Product ingredient list |
Report Details
| Testing Laboratory | Sigma Test & Research Centre (NABL-accredited, Accreditation No. TC-5369) |
| ULR Number | TC536922000002832F |
| Report No. | 13002499/A, 13002499/B |
| Report Issue Date | 26/04/2022 |
| Testing Period | 30/03/2022 to 07/04/2022 |
| Batch Tested | BHTS-01 (Mfg. 03/2022; 02/2024) |
| Standards Referenced | IS:2711:1979; IS:6608:2004; IS:14648:2011 |
| Authorised Signatory | Vinit Sharma, Person Incharge, Sigma Test & Research Centre |
What This Report Shows
What the results demonstrate
- Physical characteristics of the tested sample were recorded as observed by the laboratory.
- The listed heavy metals were below the laboratory's detection limit in the tested sample.
- The tested sample met the microbiological count limits of the referenced standard.
- The specified pathogenic microorganisms were reported Absent in the tested sample.
- Testing was performed by an NABL-accredited laboratory.
What the results do not demonstrate
- They do not certify the product; NABL accredits laboratories, not products.
- They do not establish overall safety or suitability for every individual.
- They do not prove any cosmetic-benefit or performance claim; those are addressed separately and on the product page.
- They do not cover parameters or organisms outside those listed.
- They apply to the tested sample from the stated batch, not necessarily to other batches.
Formulation at a Glance
From the ingredient list published on the product page. Not part of the laboratory report.
Active Ingredients
| Component | Role in the formulation |
|---|---|
| Hyaluronic Acid | Humectant that binds water in the upper skin layers. |
Conditioning Agents
| Component | Role in the formulation |
|---|---|
| Cyclopentasiloxane | Volatile silicone giving a light, smooth application. |
| Dimethicone Crosspolymer | Silicone that smooths the surface and adds slip. |
UV Filters
| Component | Role in the formulation |
|---|---|
| Zinc Oxide | Mineral UV filter with soothing properties. |
| Titanium Dioxide | Mineral UV filter; also used as a white pigment. |
What the Formulation Leaves Out
| Excluded | Basis |
|---|---|
| No sulphates | Not present in the published ingredient list. |
| No parabens | Not present in the published ingredient list. |
| No mineral oil | Not present in the published ingredient list. |
Published Research on Key Actives
Published literature on each ingredient, not studies on this product.
| Ingredient | Published finding | Relevance to the formulation |
|---|---|---|
| Hyaluronic Acid | Hyaluronic acid is documented as a key water-binding molecule in skin hydration (Papakonstantinou E, et al. Dermatoendocrinol. 2012;4(3):253-258). | Supports hyaluronic acid or sodium hyaluronate as a hydrating agent. |
| Zinc Oxide | Zinc oxide is an established broad-spectrum mineral UV filter (Smijs TG, Pavel S. Nanotechnol Sci Appl. 2011;4:95-112). | Supports zinc oxide as a mineral sun-protection filter. |
Dermatological Patch Test Certificate
This NABL lab test report covers the chemical and microbiological analysis of 1% Hyaluronic Tinted Sunscreen Gel SPF 60. Skin tolerance is a separate question, assessed through dermatological patch testing. The dermatological patch test certificate for this product is published on its own page, so you can review the laboratory analysis here and the patch-test findings there as one trust cluster.
View the Original Lab Report
The complete original report for 1% Hyaluronic Tinted Sunscreen Gel SPF 60 is available as issued by the laboratory. It carries the laboratory letterhead, the ULR number, and the authorised signatory's details.
The Tested Product
1% Hyaluronic Tinted Sunscreen Gel SPF 60
The results on this page come from laboratory testing of a sample from batch BHTS-01. See the complete ingredient list, current offers and reviews on the product page. You can also explore the full product range or other products in this category.
View ProductFrequently Asked Questions
A: Yes. In this report, Lead, Cadmium, Arsenic, Mercury and Antimony were reported below the laboratory's stated detection limit of 0.25 mg/kg at Sigma Test & Research Centre, an NABL-accredited laboratory (Accreditation No. TC-5369).
A: For the tested batch, microbial counts were reported within the limits of the referenced standard and the specified pathogens were reported Absent. These results indicate the tested sample met the referenced microbiological limits; they do not establish overall product safety.
A: The measured pH in this report is 6.30.
A: The published ingredient list for this product contains no sulphates, parabens or mineral oil. This is based on the ingredient list, not on the laboratory report, which covers contaminants and microbiological quality.
A: No. The report covers chemical and microbiological parameters on a sample from the stated batch. Performance and cosmetic-benefit claims are made by the brand on the product page and are not part of this laboratory report.
A: "Not Detected" means a substance was below the laboratory's stated detection limit using the specified method. "Absent" means a specified microorganism was not detected in the tested quantity using the referenced method.
A: A ULR (Unique Lab Report) number is a one-of-a-kind identifier that NABL-accredited laboratories print on every test report, making it traceable. The ULR for this report is TC536922000002832F. The original report PDF linked on this page carries the laboratory letterhead and authorised signatory details.
A: No. NABL accredits laboratories, not products. This page reports the results of testing performed at Sigma Test & Research Centre, an NABL-accredited laboratory (Accreditation No. TC-5369) on a sample of this product. It does not represent a product certification by NABL.
A: The report covers batch BHTS-01 (manufactured 03/2022). The laboratory report states the tested sample as 50g X 6. Results refer only to the tested sample and the parameters listed.
References
- IS:2711:1979. Bureau of Indian Standards.
- IS:6608:2004. Bureau of Indian Standards.
- IS:14648:2011. Bureau of Indian Standards.
- Smijs TG, Pavel S. Nanotechnol Sci Appl. 2011;4:95-112.
- Sigma Test & Research Centre. Test reports 13002499/A, 13002499/B.
Available offers for you (4)