NABL Test Report for 10% Niacinamide Face Serum with 2% Zinc
10% Niacinamide Face Serum with 2% Zinc: NABL Lab Test Report
NABL lab test report for 10% Niacinamide Face Serum with 2% Zinc: heavy metals not detected, microbial counts within limits and pH 5.11. Batch AC5B023.
Safety Summary: 10% Niacinamide Face Serum with 2% Zinc
Is 10% Niacinamide Face Serum with 2% Zinc laboratory tested? Yes. It was independently tested at Sigma Test & Research Centre, a laboratory accredited by NABL (Accreditation No. TC-15193). The tested sample belongs to batch AC5B023.
Heavy metals not detected. Lead, cadmium, arsenic and antimony were below the laboratory's detection limit of 0.25 mg/kg, while mercury was below its detection limit of 0.1 mg/kg.
Microbiological quality. Total microbial count was less than 10 cfu/g against a limit of NMT 1000 cfu/g. Total yeast and mould count was less than 10 cfu/g against a limit of NMT 100 cfu/g.
Measured pH. The laboratory recorded a pH of 5.11 for the tested sample.
1,4-Dioxane not detected. The laboratory reported this substance as not detected at a detection limit of 1.0 mg/kg.
Sulphate-free and paraben-free. The published product ingredient list contains no sulphates, parabens, silicones or mineral oil. This information comes from the ingredient list, not from the laboratory report.
Scope of these results. Findings apply to the tested batch and specified laboratory parameters. Skin tolerance is assessed separately in dermatological patch testing. NABL accredits laboratories, not products.
Key Findings at a Glance
Results of Analysis
Result is the measured outcome for this batch. Requirement / Limit is the specification where one is provided. Test Method identifies the laboratory method or reference standard.
| Parameter | Result | Requirement / Limit | Test Method |
|---|---|---|---|
| Physical & Organoleptic | |||
| Appearance | Colourless viscous liquid | — | STRC/STP/F256 |
| Colour | Colourless | — | STRC/STP/F256 |
| Odour | Characteristic | — | STRC/STP/P044 |
| Chemical Parameters | |||
| pH | 5.11 | — | STRC/STP/P077 |
| 1,4 Dioxane (mg/kg) | Not Detected (DL 1.0) | — | Indian Pharmacopoeia, Chapter 2.4.40 |
| Density (g/ml) | 1.022 | — | Indian Pharmacopoeia 2022 |
| Total residue (% w/w) | 8.33 | — | IS:6608:2004 |
| Microbiological Parameters | |||
| Total microbial count (cfu/g) | Less than 10 | NMT 1000 | IS:14648:2011 |
| Total yeast & mould count (cfu/g) | Less than 10 | NMT 100 | IS:14648:2011 |
| Heavy Metals | |||
| Lead (as Pb), mg/kg | Not Detected (DL 0.25) | — | STRC/STP/P018 |
| Cadmium (as Cd), mg/kg | Not Detected (DL 0.25) | — | STRC/STP/P018 |
| Arsenic (as As), mg/kg | Not Detected (DL 0.25) | — | STRC/STP/P018 |
| Mercury (as Hg), mg/kg | Not Detected (DL 0.1) | — | STRC/STP/P018 |
| Antimony (as Sb), mg/kg | Not Detected (DL 0.25) | — | STRC/STP/P018 |
Understanding These Tests for 10% Niacinamide Face Serum with 2% Zinc
Physical & Organoleptic
The laboratory recorded the tested sample as a colourless viscous liquid with a characteristic odour.
These observations document the sample's physical properties at the time of testing.
Chemical Parameters
The report records pH 5.11, density 1.022 g/ml and total residue 8.33% w/w. 1,4-Dioxane was not detected at a laboratory detection limit of 1.0 mg/kg.
No specification limit was provided for these chemical parameters in the certificate.
Heavy Metals
Lead, cadmium, arsenic and antimony were not detected at the respective 0.25 mg/kg detection limit. Mercury was not detected at 0.1 mg/kg.
Not detected means that the measured substance was below the stated detection limit, not necessarily completely absent.
Microbial Counts
Total microbial count and total yeast and mould count were both less than 10 cfu/g.
These results were within the report's specified microbiological limits.
Test Overview
| Report Title | Chemical and Microbiological Laboratory Analysis – 10% Niacinamide Face Serum |
| Parameters Measured | Physical properties, chemical parameters, heavy metals and microbial counts |
| Test Type | Laboratory chemical and microbiological analysis of a cosmetic sample |
| Test Methods | STRC/STP/F256; STRC/STP/P044; STRC/STP/P077; STRC/STP/P018; IS:14648:2011; IS:6608:2004; Indian Pharmacopoeia 2022 |
| Sample Tested | AC5B023 (30 ml x 3) |
About 10% Niacinamide Face Serum with 2% Zinc
Buy The Derma Co 10% Niacinamide Face Serum with 2% Zinc PCA. Designed by dermatologists, it fades acne marks, controls sebum, and tightens pores.
Claims and Their Evidence
Lab-sourced rows are measured results. Product-page rows are the brand's own claims. The laboratory report is not evidence for cosmetic-benefit claims.
| Statement | Evidence / basis | Source |
|---|---|---|
| Heavy metals not detected | Lead, cadmium, arsenic and antimony below 0.25 mg/kg; mercury below 0.1 mg/kg. | Lab report 13034162/B |
| Microbial counts within limits | Both counts less than 10 cfu/g against the listed limits. | Lab report 13034162/B |
| 10% Niacinamide Face Serum with 2% Zinc PCA | Brand claim published on the product page. | Product page (brand claim) |
| Sulphate-free cleansing base | No SLS or SLES in the referenced published ingredient list. | Product ingredient list |
| Paraben-free | No parabens in the referenced published ingredient list. | Product ingredient list |
Report Details
| Testing Laboratory | Sigma Test & Research Centre (NABL-accredited, TC-15193) |
| ULR Number | TC1519325000001698F |
| Report No. | 13034162/A, 13034162/B |
| Report Issue Date | 15/03/2025 |
| Testing Period | 06/03/2025 to 13/03/2025 |
| Batch Tested | AC5B023 (Mfg. 02/2025; use before 24 months) |
| Sample Quantity | 30 ml x 3 |
| Standards Referenced | IS:14648:2011; IS:6608:2004; Indian Pharmacopoeia 2022; STRC laboratory methods |
| Authorised Signatory | Shruti Vij, Technical Manager, Sigma Test & Research Centre |
What This Report Shows
What the results demonstrate
- Physical characteristics of the tested sample were recorded by the laboratory.
- Lead, cadmium, arsenic, mercury and antimony were below their stated detection limits.
- The measured pH was 5.11.
- Microbial counts were within the stated limits.
- Testing was performed at an NABL-accredited laboratory.
What the results do not demonstrate
- They do not certify the product; NABL accredits laboratories, not products.
- They do not establish overall safety or suitability for every individual.
- They do not prove cosmetic-benefit or performance claims.
- They do not cover parameters outside those tested.
- They apply to the tested sample from the stated batch, not necessarily to other batches.
Formulation at a Glance
From the ingredient list published on the product page. Not part of the laboratory report.
Active Ingredients
| Component | Role in the formulation |
|---|---|
| Niacinamide | Vitamin B3 derivative used for tone and barrier support. |
Moisturising and Emollient
| Component | Role in the formulation |
|---|---|
| Propanediol | Humectant and solvent that improves texture. |
| Glycerin | Humectant that draws water into the skin surface. |
| Pentylene Glycol | Humectant that also supports preservation. |
Texture and Stability
| Component | Role in the formulation |
|---|---|
| Aqua (Water) | Solvent base of the formulation. |
| Xanthan Gum | Natural thickener that stabilises the formulation. |
| Citric Acid | Adjusts the pH of the formulation. |
Preservative System
| Component | Role in the formulation |
|---|---|
| Phenoxyethanol | Broad-spectrum preservative used at low levels. |
| Sodium Benzoate | Preservative effective in acidic formulations. |
| Potassium Sorbate | Preservative that works with sodium benzoate. |
What the Formulation Leaves Out
| Excluded | Basis |
|---|---|
| No sulphates | Not present in the published ingredient list. |
| No parabens | Not present in the published ingredient list. |
| No silicones | Not present in the published ingredient list. |
| No mineral oil | Not present in the published ingredient list. |
Published Research on Key Actives
Published literature on each ingredient, not studies on this product.
| Ingredient | Published finding | Relevance to the formulation |
|---|---|---|
| Niacinamide | Topical niacinamide has been reported to improve the appearance of ageing facial skin, including tone and texture (Bissett DL, et al. Dermatol Surg. 2005;31(7 Pt 2):860-865). | Supports the inclusion of niacinamide in tone and barrier formulas. |
Dermatological Patch Test Certificate
This NABL lab test report covers the chemical and microbiological analysis of 10% Niacinamide Face Serum with 2% Zinc. Skin tolerance is a separate question, assessed through dermatological patch testing. The dermatological patch test certificate for this product is published on its own page, so you can review the laboratory analysis here and the patch-test findings there as one trust cluster.
View the Original Lab Report
The complete original report for 10% Niacinamide Face Serum with 2% Zinc is available as issued by the laboratory. It carries the laboratory letterhead, ULR number TC1519325000001698F, and authorised signatory details.
The Tested Product
10% Niacinamide Face Serum with 2% Zinc
The results on this page come from laboratory testing of a sample from batch AC5B023. See the complete ingredient list, current offers and reviews on the product page. Learn more about Niacinamide. You can also explore the full product range or other products in this category.
View ProductFrequently Asked Questions
A: Yes. Lead, cadmium, arsenic and antimony were reported not detected at a detection limit of 0.25 mg/kg, while mercury was not detected at 0.1 mg/kg, by Sigma Test & Research Centre (NABL accreditation TC-15193).
A: The measured pH in this report is 5.11.
A: Yes. Total microbial count and total yeast and mould count were both reported below 10 cfu/g and within their respective stated limits.
A: The published ingredient list contains no sulphates, parabens, silicones or mineral oil. These ingredient-list exclusions are not laboratory findings in this report.
A: No. This certificate records chemical and microbiological test outcomes on a specified sample. It does not independently establish cosmetic performance or efficacy.
A: It means the laboratory did not detect the substance at or above the stated detection limit using the specified test method.
A: The ULR printed on the report is TC1519325000001698F. The original certificate includes laboratory identification and verification information.
A: No. NABL accredits testing laboratories rather than individual cosmetic products.
A: Batch AC5B023, manufactured in February 2025. The submitted sample quantity was 30 ml x 3.
References
- Indian Pharmacopoeia 2022. Indian Pharmacopoeia Commission.
- IS:14648:2011. Bureau of Indian Standards.
- IS:6608:2004. Bureau of Indian Standards.
- Sigma Test & Research Centre. Test reports 13034162/A and 13034162/B, issued 15/03/2025.
