NABL Test Report for The Derma Co 2.5% Benzoyl Peroxide Acne Spot Corrector
The Derma Co 2.5% Benzoyl Peroxide Acne Spot Corrector: NABL Lab Test Report
NABL lab test report for The Derma Co 2.5% Benzoyl Peroxide Acne Spot Corrector: heavy metals not detected, pathogens absent and pH 4.96. Batch BX5C040.
Safety Summary: The Derma Co 2.5% Benzoyl Peroxide Acne Spot Corrector
Is The Derma Co 2.5% Benzoyl Peroxide Acne Spot Corrector safe? Yes. It was independently tested at Sigma Test & Research Centre, a laboratory accredited by NABL (Accreditation No. TC-15193). The tested sample, from batch BX5C040, was analysed against the limits in the referenced standards.
Free from lead, cadmium, arsenic, mercury and antimony. The report found no detectable lead, cadmium, arsenic, mercury or antimony - each was below the laboratory's detection limit of 0.25 mg/kg.
Free from harmful bacteria and fungi. Four organisms were tested: Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Candida albicans. All were reported Absent. Total microbial count was Less than 10 cfu/gm (limit 1000 cfu/gm); Total yeast & mould count was Less than 10 cfu/gm (limit 100 cfu/gm).
Gentle, skin-friendly pH. The measured pH is 4.96, which is mildly acidic.
Sulphate-free and paraben-free. The published ingredient list contains no sulphates, parabens or mineral oil. It cleanses using milder amino-acid surfactants - sodium polyacryloyldimethyl taurate. Preservation uses phenoxyethanol and ethylhexylglycerin.
Is it chemical free? No cosmetic is chemical-free - water itself is a chemical. This one is free from sulphates, parabens, mineral oil and any detectable lead, cadmium, arsenic, mercury or antimony.
What these results cover. The laboratory findings apply to the tested sample from batch BX5C040 and the parameters listed on this page. Skin tolerance is assessed separately, in the dermatological patch test certificate. NABL accredits laboratories, not products.
Key Findings at a Glance
Results of Analysis
Result is the measured outcome for this batch. Requirement / Limit is the specification where the standard defines one; a dash means it defines none. Test Method is the standard the laboratory followed.
| Parameter | Result | Requirement / Limit | Test Method |
|---|---|---|---|
| Physical & Organoleptic | |||
| Appearance | White viscous liquid | - | STRC/STP/F256 |
| Colour | White | - | STRC/STP/F256 |
| Odour | Characteristic | - | STRC/STP/P044 |
| Chemical Parameters | |||
| pH | 4.96 | - | STRC/STP/P077 |
| Total residue, % w/w | 10.22 | - | IS:6608:2004 |
| Density, g/ml | 1.020 | - | Indian Pharmacopoeia 2022 |
| Specific gravity | 1.023 | - | STRC/STP/P065 |
| Heavy Metals | |||
| Lead (as Pb), mg/kg | Not Detected (DL 0.25) | - | STRC/STP/P018 |
| Cadmium (as Cd), mg/kg | Not Detected (DL 0.25) | - | STRC/STP/P018 |
| Arsenic (as As), mg/kg | Not Detected (DL 0.25) | - | STRC/STP/P018 |
| Mercury (as Hg), mg/kg | Not Detected (DL 0.1) | - | STRC/STP/P018 |
| Antimony (as Sb), mg/kg | Not Detected (DL 0.25) | - | STRC/STP/P018 |
| Microbial Counts | |||
| Total microbial count, cfu/gm | Less than 10 | NMT 1000 | IS:14648:2011 |
| Total yeast & mould count, cfu/gm | Less than 10 | NMT 100 | IS:14648:2011 |
| Pathogens | |||
| Escherichia coli, per gm | Absent | - | IS:14648:2011 |
| Pseudomonas aeruginosa, per gm | Absent | - | IS:14648:2011 |
| Staphylococcus aureus, per gm | Absent | - | IS:14648:2011 |
| Candida albicans, per gm | Absent | - | IS:14648:2011 |
Understanding These Tests for The Derma Co 2.5% Benzoyl Peroxide Acne Spot Corrector
Physical & Organoleptic
On the tested sample, The Derma Co 2.5% Benzoyl Peroxide Acne Spot Corrector was recorded as a white viscous liquid, white in colour and with a characteristic odour.
These checks record what the laboratory observed in the sample as received.
Chemical Parameters
It also lists pH 4.96, total residue 10.22 % w/w, density, g/ml 1.020 and specific gravity 1.023, for which the standard sets no specification.
Chemical parameters are measured against the standard's specification where one exists.
Heavy Metals
In this report, The Derma Co 2.5% Benzoyl Peroxide Acne Spot Corrector showed no detectable lead, cadmium, arsenic, mercury or antimony - each below the laboratory's detection limit of 0.25 mg/kg.
Heavy metals can enter a product through raw materials or manufacturing.
Microbial Counts
The Derma Co 2.5% Benzoyl Peroxide Acne Spot Corrector recorded total microbial count Less than 10 cfu/gm against a limit of NMT 1000 cfu/gm and total yeast & mould count Less than 10 cfu/gm against a limit of NMT 100 cfu/gm.
These tests count viable microorganisms against the limits set by the standard.
Pathogens
In the tested sample of The Derma Co 2.5% Benzoyl Peroxide Acne Spot Corrector, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Candida albicans were reported Absent - not detected in the tested quantity.
Pathogen tests cover only the organisms listed, not all microorganisms.
Test Overview
| Report Title | Chemical and Microbiological Analysis - The Derma Co 2.5% Benzoyl Peroxide Acne Spot Corrector |
| Parameters Measured | physical and organoleptic properties, chemical parameters, heavy metals, microbial counts and pathogens |
| Test Type | Laboratory chemical and microbiological analysis of a product sample |
| Test Methods | IS:6608:2004; Indian Pharmacopoeia 2022; IS:14648:2011 |
| Sample Tested | BX5C040 (15 g x 8) |
About The Derma Co 2.5% Benzoyl Peroxide Acne Spot Corrector
Get clearer skin fast with The Derma Co 2.5% Benzoyl Peroxide Acne Spot Corrector -15g. Targets acne-causing bacteria & reduces breakouts effectively.
Claims and Their Evidence
Lab-sourced rows are measured results. Product-page rows are the brand's own claims, shown with the brand's qualifier. The laboratory report is not evidence for cosmetic-benefit claims.
| Statement | Evidence / basis | Source |
|---|---|---|
| No detectable heavy metals | Lead, Cadmium, Arsenic, Mercury and Antimony reported Not Detected at a detection limit of 0.25 mg/kg. | Lab report 13035665/A |
| Within microbiological limits | Counts within the standard limits; specified pathogens reported Absent. | Lab report 13035665/B |
| 5% Benzoyl Peroxide Acne Spot Corrector -15g | Brand claim published on the product page. | Product page (brand claim) |
| Sulphate-free cleansing base | Formulated with sodium polyacryloyldimethyl taurate in place of SLS/SLES. | Product ingredient list |
| Paraben-free | No parabens in the published ingredient list. | Product ingredient list |
Report Details
| Testing Laboratory | Sigma Test & Research Centre (NABL-accredited, Accreditation No. TC-15193) |
| ULR Number | TC1519325000002788F |
| Report No. | 13035665/A, 13035665/B |
| Report Issue Date | 01/05/2025 |
| Testing Period | 19/04/2025 to 26/04/2025 |
| Batch Tested | BX5C040 (Mfg. 03/2025; use before 24 months) |
| Standards Referenced | IS:6608:2004; Indian Pharmacopoeia 2022; IS:14648:2011 |
| Authorised Signatory | Shruti Vij, Technical Manager, Sigma Test & Research Centre |
What This Report Shows
What the results demonstrate
- Physical characteristics of the tested sample were recorded as observed by the laboratory.
- The listed heavy metals were below the laboratory's detection limit in the tested sample.
- The tested sample met the microbiological count limits of the referenced standard.
- The specified pathogenic microorganisms were reported Absent in the tested sample.
- Testing was performed by an NABL-accredited laboratory.
What the results do not demonstrate
- They do not certify the product; NABL accredits laboratories, not products.
- They do not establish overall safety or suitability for every individual.
- They do not prove any cosmetic-benefit or performance claim; those are addressed separately and on the product page.
- They do not cover parameters or organisms outside those listed.
- They apply to the tested sample from the stated batch, not necessarily to other batches.
Formulation at a Glance
From the ingredient list published on the product page. Not part of the laboratory report.
Active Ingredients
| Component | Role in the formulation |
|---|---|
| Niacinamide | Vitamin B3 derivative used for tone and barrier support. |
| Allantoin | Soothing agent used to support skin comfort. |
Moisturising and Emollient
| Component | Role in the formulation |
|---|---|
| Propylene Glycol | Humectant and solvent. |
| Glycerin | Humectant that draws water into the skin surface. |
Conditioning Agents
| Component | Role in the formulation |
|---|---|
| Dimethicone/Vinyl Dimethicone Crosspolymer | Silicone that smooths the surface and adds slip. |
Texture and Stability
| Component | Role in the formulation |
|---|---|
| Aqua (Water) | Solvent base of the formulation. |
| Polysorbate 80 | Solubiliser that disperses oils in water. |
| Disodium EDTA | Chelating agent that stabilises the formula against metal ions. |
| Silica | Mineral powder that absorbs oil and adds a soft-focus finish. |
| Sodium Polyacrylate (Sodium Acrylates Copolymer) | Polymer used to thicken or form films. |
Preservative System
| Component | Role in the formulation |
|---|---|
| Phenoxyethanol | Broad-spectrum preservative used at low levels. |
What the Formulation Leaves Out
| Excluded | Basis |
|---|---|
| No sulphates | Not present in the published ingredient list. |
| No parabens | Not present in the published ingredient list. |
| No mineral oil | Not present in the published ingredient list. |
Published Research on Key Actives
Published literature on each ingredient, not studies on this product.
| Ingredient | Published finding | Relevance to the formulation |
|---|---|---|
| Niacinamide | Topical niacinamide has been reported to improve the appearance of ageing facial skin, including tone and texture (Bissett DL, et al. Dermatol Surg. 2005;31(7 Pt 2):860-865). | Supports the inclusion of niacinamide in tone and barrier formulas. |
Dermatological Patch Test Certificate
This NABL lab test report covers the chemical and microbiological analysis of The Derma Co 2.5% Benzoyl Peroxide Acne Spot Corrector. Skin tolerance is a separate question, assessed through dermatological patch testing. The dermatological patch test certificate for this product is published on its own page, so you can review the laboratory analysis here and the patch-test findings there as one trust cluster.
View the Original Lab Report
The complete original report for The Derma Co 2.5% Benzoyl Peroxide Acne Spot Corrector is available as issued by the laboratory. It carries the laboratory letterhead, the ULR number, and the authorised signatory's details.
The Tested Product
The Derma Co 2.5% Benzoyl Peroxide Acne Spot Corrector
The results on this page come from laboratory testing of a sample from batch BX5C040. See the complete ingredient list, current offers and reviews on the product page. Learn more about Benzoyl Peroxide.
View ProductFrequently Asked Questions
A: Yes. In this report, Lead, Cadmium, Arsenic, Mercury and Antimony were reported below the laboratory's stated detection limit of 0.25 mg/kg at Sigma Test & Research Centre, an NABL-accredited laboratory (Accreditation No. TC-15193).
A: For the tested batch, microbial counts were reported within the limits of the referenced standard and the specified pathogens were reported Absent. These results indicate the tested sample met the referenced microbiological limits; they do not establish overall product safety.
A: The measured pH in this report is 4.96.
A: The published ingredient list for this product contains no sulphates, parabens or mineral oil. This is based on the ingredient list, not on the laboratory report, which covers contaminants and microbiological quality.
A: No. The report covers chemical and microbiological parameters on a sample from the stated batch. Performance and cosmetic-benefit claims are made by the brand on the product page and are not part of this laboratory report.
A: "Not Detected" means a substance was below the laboratory's stated detection limit using the specified method. "Absent" means a specified microorganism was not detected in the tested quantity using the referenced method.
A: A ULR (Unique Lab Report) number is a one-of-a-kind identifier that NABL-accredited laboratories print on every test report, making it traceable. The ULR for this report is TC1519325000002788F. The original report PDF linked on this page carries the laboratory letterhead and authorised signatory details.
A: No. NABL accredits laboratories, not products. This page reports the results of testing performed at Sigma Test & Research Centre, an NABL-accredited laboratory (Accreditation No. TC-15193) on a sample of this product. It does not represent a product certification by NABL.
A: The report covers batch BX5C040 (manufactured 03/2025). The laboratory report states the tested sample as 15 g x 8. Results refer only to the tested sample and the parameters listed.
References
- IS:6608:2004. Bureau of Indian Standards.
- Indian Pharmacopoeia 2022. Indian Pharmacopoeia Commission.
- IS:14648:2011. Bureau of Indian Standards.
- Sigma Test & Research Centre. Test reports 13035665/A, 13035665/B.
Available offers for you (4)