NABL Test Report for Hyaluronic Acid with 10 % Vitamin C Serum

Tested at an NABL-Accredited Laboratory

Hyaluronic Acid with 10 % Vitamin C Serum: NABL Lab Test Report

NABL lab test report for Hyaluronic Acid with 10 % Vitamin C Serum, batch BX5A023. The accelerated shelf-life study records appearance, colour, odour, pH, density and microbiological parameters over 360 days.

Testing LaboratorySigma Test & Research Centre
NABL AccreditationTC-15193
Report No.13033366/N, 13033366/Z
Batch TestedBX5A023

Safety Summary: Hyaluronic Acid with 10 % Vitamin C Serum

Is Hyaluronic Acid with 10 % Vitamin C Serum tested? Yes. The sample from batch BX5A023 underwent accelerated shelf-life testing at Sigma Test & Research Centre, an NABL-accredited laboratory (Accreditation No. TC-15193).

Appearance and colour. The serum was colourless initially and through day 180, yellow at day 270 and brownish-yellow after 360 days. The laboratory report does not specify an acceptance limit for colour.

Microbiological quality. Total microbial count remained less than 10 cfu/g against a limit of NMT 1000 cfu/g; total yeast and mould count remained less than 10 cfu/g against NMT 100 cfu/g at all five checkpoints.

Measured pH. The report records pH 4.80 initially, followed by 4.79, 4.60, 4.20 and 4.13 over the study.

Sulphate-free and paraben-free. The published product ingredient list contains no sulphates, parabens, silicones or mineral oil. Preservation uses sodium benzoate. These ingredient details are not test findings from the accelerated shelf-life certificate.

Heavy-metal testing. The new certificate does not include lead, cadmium, arsenic, mercury or antimony results. Therefore, heavy-metal absence cannot be concluded from this report.

What these results cover. Laboratory findings apply to the tested sample from batch BX5A023 and the listed parameters. Skin tolerance is evaluated separately through dermatological testing. NABL accredits laboratories, not products.

Key Findings at a Glance

🧪
Physical Parameters Monitored
Appearance and colour changes recorded across 360 days
📊
Microbial Counts Within Limits
Both counts below 10 cfu/g throughout the study

Results of Analysis

Result is the observed or measured outcome for the tested batch. Requirement / Limit is the reported specification where one exists; a dash indicates no specified limit. Test Method identifies the laboratory method or referenced standard.

Parameter Result Requirement / Limit Test Method
Physical & Organoleptic
Appearance Initial, 90 and 180 days: Colourless viscous liquid; 270 days: Yellow-coloured viscous liquid; 360 days: Brownish-yellow-coloured viscous liquid — STRC/STP/F256
Colour Initial, 90 and 180 days: Colourless; 270 days: Yellow; 360 days: Brownish yellow — STRC/STP/F256
Odour Characteristic at all five checkpoints — STRC/STP/P044
Chemical Parameters
pH Initial: 4.80; 90 days: 4.79; 180 days: 4.60; 270 days: 4.20; 360 days: 4.13 — STRC/STP/P077
Density, g/ml Initial: 1.009; 90 days: 1.006; 180 days: 1.012; 270 days: 1.026; 360 days: 1.030 — Indian Pharmacopoeia 2022
Microbiological Parameters
Total microbial count, cfu/g Less than 10 at all five checkpoints NMT 1000 IS:14648:2011
Total yeast & mould count, cfu/g Less than 10 at all five checkpoints NMT 100 IS:14648:2011
Escherichia coli, per g Absent initially and after 360 days; intermediate results not reported — IS:14648:2011
Pseudomonas aeruginosa, per g Absent initially and after 360 days; intermediate results not reported — IS:14648:2011
Staphylococcus aureus, per g Absent initially and after 360 days; intermediate results not reported — IS:14648:2011
Candida albicans, per g Absent initially and after 360 days; intermediate results not reported — IS:14648:2011

Study conditions: Accelerated shelf-life testing after 360 days, temperature 40°C ± 2°C and humidity 65% RH ± 5%. NMT means Not More Than.

Understanding These Tests for Hyaluronic Acid with 10 % Vitamin C Serum

Physical & Organoleptic

The tested serum was recorded as a colourless viscous liquid initially and through 180 days, yellow at 270 days and brownish-yellow after 360 days.

These checks record what the laboratory observed in the sample under accelerated study conditions.

Chemical Parameters

The pH changed from 4.80 initially to 4.13 after 360 days. Density changed from 1.009 g/ml to 1.030 g/ml across the same study period.

No acceptance limit was stated for pH or density in the certificate.

Accelerated Shelf-Life Conditions

The study was performed at 40°C ± 2°C and 65% RH ± 5%.

These accelerated results should not be interpreted as direct proof of real-time product shelf life.

Microbial Counts

Total microbial count and total yeast and mould count remained less than 10 cfu/g at all five checkpoints, within their specified limits.

Four specified microorganisms were reported absent at the initial and 360-day checkpoints.

Test Overview

Report Title Accelerated Shelf-Life Study – Hyaluronic Acid with 10 % Vitamin C Serum
Parameters Measured Physical and organoleptic properties, pH, density and microbiological parameters
Test Type Accelerated shelf-life laboratory study
Test Methods STRC/STP/F256; STRC/STP/P044; STRC/STP/P077; IS:14648:2011; Indian Pharmacopoeia 2022
Sample Tested BX5A023 (30 ml x 3 in each cycle)

About Hyaluronic Acid with 10 % Vitamin C Serum

Buy The Derma Co's Hyaluronic Acid Face Serum with 10 % Vitamin C with 5% Niacinamide. It brightens & hydrates skin, reduces dark spots & improves radiance.

Claims and Their Evidence

Lab-sourced rows are measured results. Product-page rows are the brand's own claims, shown with the brand's qualifier. The laboratory report is not evidence for cosmetic-benefit claims.

Statement Evidence / basis Source
Microbial counts within limits Both counts were less than 10 cfu/g at all checkpoints. Lab report 13033366/Z
Specified microorganisms absent E. coli, P. aeruginosa, S. aureus and C. albicans reported absent initially and after 360 days. Lab report 13033366/Z
Appearance monitored Colourless initially; yellow after 270 days and brownish-yellow after 360 days. Lab report 13033366/N
10 % Vitamin C with 5% Niacinamide Brand claim published on the product page. Product page (brand claim)
Sulphate-free and paraben-free No sulphates or parabens in the referenced published ingredient list. Product ingredient list

Report Details

Testing Laboratory Sigma Test & Research Centre (NABL-accredited, Accreditation No. TC-15193)
ULR Number TC1519326000001069F (report 13033366/N)
Report No. 13033366/N, 13033366/Z
Report Issue Date 10/02/2026
Testing Period 06/02/2025 to 10/02/2026
Batch Tested BX5A023 (Mfg. 01/2025; use before 24 months)
Standards Referenced IS:14648:2011; Indian Pharmacopoeia 2022; STRC laboratory methods
Authorised Signatory Shruti Vij, Technical Manager, Sigma Test & Research Centre

What This Report Shows

What the results demonstrate

  • Physical characteristics of the tested sample were recorded at five checkpoints.
  • pH and density were measured during accelerated storage.
  • The microbial counts stayed within the specified limits.
  • Specified microorganisms were reported absent initially and after 360 days.
  • Testing was performed at an NABL-accredited laboratory.

What the results do not demonstrate

  • They do not certify the product; NABL accredits laboratories, not products.
  • They do not establish overall safety or suitability for every individual.
  • They do not prove cosmetic-benefit or performance claims.
  • They do not cover heavy-metal parameters or other unlisted tests.
  • They apply to the tested sample and specified study conditions.

Formulation at a Glance

From the ingredient list published on the product page. Not part of the laboratory report.

Active Ingredients

Component Role in the formulation
3-O-Ethyl Ascorbic Acid (Vitamin C) Vitamin C, an antioxidant used for brightness.
Niacinamide Vitamin B3 derivative used for tone and barrier support.
Sodium Hyaluronate (Hyaluronic Acid) Salt of hyaluronic acid; binds water for hydration.

Moisturising and Emollient

Component Role in the formulation
Propanediol Humectant and solvent that improves texture.
Pentylene Glycol Humectant that also supports preservation.
Glycerin Humectant that draws water into the skin surface.

Texture and Stability

Component Role in the formulation
Aqua (Water) Solvent base of the formulation.
Citric Acid Adjusts the pH of the formulation.
Hydrated Silica Mineral powder that absorbs oil and adds a soft-focus finish.

Preservative System

Component Role in the formulation
Sodium Benzoate Preservative effective in acidic formulations.

What the Formulation Leaves Out

Excluded Basis
No sulphates Not present in the published ingredient list.
No parabens Not present in the published ingredient list.
No silicones Not present in the published ingredient list.
No mineral oil Not present in the published ingredient list.

Published Research on Key Actives

Published literature on each ingredient, not studies on this product.

Ingredient Published finding Relevance to the formulation
Niacinamide Topical niacinamide has been reported to improve the appearance of ageing facial skin, including tone and texture (Bissett DL, et al. Dermatol Surg. 2005;31(7 Pt 2):860-865). Supports the inclusion of niacinamide in tone and barrier formulas.
Vitamin C Vitamin C contributes to collagen synthesis and antioxidant defence in skin (Pullar JM, et al. Nutrients. 2017;9(8):866). Supports vitamin C as an antioxidant and brightening active.
Hyaluronic Acid Hyaluronic acid is documented as a key water-binding molecule in skin hydration (Papakonstantinou E, et al. Dermatoendocrinol. 2012;4(3):253-258). Supports hyaluronic acid or sodium hyaluronate as a hydrating agent.

Dermatological Patch Test Certificate

This NABL lab test report covers the chemical and microbiological analysis of Hyaluronic Acid with 10 % Vitamin C Serum. Skin tolerance is a separate question, assessed through dermatological patch testing. The dermatological patch test certificate for this product is published on its own page, so you can review the laboratory analysis here and the patch-test findings there as one trust cluster.

View the Original Lab Report

The complete original report for Hyaluronic Acid with 10 % Vitamin C Serum is available as issued by the laboratory. It carries the laboratory letterhead, report numbers 13033366/N and 13033366/Z, and the authorised signatory's details.

View Report PDF

The Tested Product

Hyaluronic Acid with 10 % Vitamin C Serum

Hyaluronic Acid with 10 % Vitamin C Serum

The results on this page come from laboratory testing of a sample from batch BX5A023. See the complete ingredient list, current offers and reviews on the product page. Learn more about Hyaluronic Acid and Vitamin C. You can also explore the full product range or other products in this category.

View Product

Frequently Asked Questions

Q: Is Hyaluronic Acid with 10 % Vitamin C Serum tested for heavy metals?

A: The new accelerated shelf-life certificate does not include heavy-metal test results. Its findings cover the physical, chemical and microbiological parameters specified in the report.

Q: Is Hyaluronic Acid with 10 % Vitamin C Serum microbiologically tested?

A: Yes. The tested batch recorded total microbial count and total yeast and mould count below 10 cfu/g at all five checkpoints, within the report's specified limits.

Q: What is the pH of Hyaluronic Acid with 10 % Vitamin C Serum?

A: The measured pH was 4.80 initially and 4.13 after 360 days of accelerated testing.

Q: Is Hyaluronic Acid with 10 % Vitamin C Serum free from sulphates and parabens?

A: The published ingredient list for this product contains no sulphates or parabens. This ingredient-list information is separate from the accelerated shelf-life report.

Q: Does this report prove Hyaluronic Acid with 10 % Vitamin C Serum works?

A: No. The report covers accelerated physical, chemical and microbiological testing of the stated sample. It does not independently establish cosmetic efficacy.

Q: Did the serum change colour during the study?

A: Yes. The sample was colourless through day 180, yellow at day 270 and brownish-yellow after 360 days.

Q: What is the ULR number and how do I verify this report?

A: Report 13033366/N displays ULR TC1519326000001069F. The original PDF includes the laboratory identification, report details and verification information.

Q: Does NABL certify this product?

A: No. NABL accredits testing laboratories, not cosmetic products. This report documents findings from Sigma Test & Research Centre for the stated batch.

Q: Which batch does this report cover?

A: The certificate covers batch BX5A023, manufactured in January 2025, with sample quantity stated as 30 ml x 3 in each cycle.

References

  1. Indian Pharmacopoeia 2022. Indian Pharmacopoeia Commission.
  2. IS:14648:2011. Bureau of Indian Standards.
  3. Sigma Test & Research Centre. Reports 13033366/N and 13033366/Z, issued 10/02/2026.

Report Verification

Testing Laboratory

Sigma Test & Research Centre

NABL Accreditation No.

TC-15193

ULR Number

TC1519326000001069F

Report No.

13033366/N, 13033366/Z

Batch Tested

BX5A023 (Mfg. 01/2025)

Report Date

10/02/2026

Results refer only to the tested sample from the stated batch and the parameters listed on this page.

View Product
Disclaimer: This page reproduces selected findings from Sigma Test & Research Centre accelerated shelf-life reports 13033366/N and 13033366/Z for batch BX5A023 of 10% Vitamin C Face Serum. Results apply to the tested sample and reported parameters under the specified study conditions. Refer to the product label for current information. NABL accredits laboratories, not products.